wagon4h (November 30, 1999 at 12:00 am)

Yes because as with all metal detectors. Different metals and different shapes of metals can and do! send back the same signal. So pull tabs can give the same signal as things you want to find. Rule Number one ! Do not ignore pull tabs. or you will miss some of what you are trying to find.

pauljefferson (November 30, 1999 at 12:00 am)

the ring pull display is placed under the bronze and gold icon?

wagon4h (November 30, 1999 at 12:00 am)

Not quite right. All manufactures that have pre set modes on there machines aim the scales on their displays at american coinage. Its the largest market for them. On the ACE 250 use the relic mode it simply knocks out small iron and leaves every thing else in. Ie all the things you want to find. Why knock out ring pulls / pull tabs.If you do ignore them on ANY metal detector you loose to much of want you want to find.

pauljefferson (November 30, 1999 at 12:00 am)

these detectors for coins are made mainly for the use in the usa, american and british coins are slightlty made up of different composition i picked up a 2 pence peice and it was coming up on the display as a silver coin also the ring pulls are coming up as a nickel and ring pulls still attached to the beer cans comes up as silver ???????????????

wagon4h (November 30, 1999 at 12:00 am)

I dont know LOL

elibaba7 (November 30, 1999 at 12:00 am)

what is the song >?>?>?

wagon4h (November 30, 1999 at 12:00 am)

look at the coins mode the section under pull tabs is the ones to remove

pauljefferson (November 30, 1999 at 12:00 am)

which black notch do i remove to take out the ring pulls out is it the 5th one along

wagon4h (November 30, 1999 at 12:00 am)

Yes you can adjust the discrimination on any mode BUT! only the custom mode will remember it when you switch off all others revert to pre sets

pauljefferson (November 30, 1999 at 12:00 am)

can i use discrim and elim settings on the other modes apart from the custom mode to get rid of trash iron steel and ring pulls